Rolling Mill Specs:
• Roller diameter 65 mm
• Roller width is 130 mm
• Maximum opening 0-5 mm
• Flat area (+/- 0.01mm) 57 mm
• Square wire (+/- 0.01mm) : 1.0, 2.0, 3.0,4.0 , 4.5, 5.0, 5.5, 6.0, 6.5
• Ring shank - half round ellipsis: 2.5 x 1:3 x 1.25 ; 4 x 1.5
Electrical:
- AC Drive System
- Variable Frequency Drive
- A Digital Hybrid AC Drive with Analog Interface
- Vented NEMA 1 / IP 20 Enclosures
Features:
- On/Off AC Line Switch
- 200% - Starting Torque
- Forward-Stop-Reverse Switch
- Holding Torque at Zero Speed in "Stop" mode
- Smooth motor torque
- Excellent speed regulation with high torque loads throughout the entire speed range.
- Regeneration Protection eliminates tripping
Safety Features:
- Overload protection
- Under voltage and Overvoltage Protection
- Short Circuit Protection, phase to phase
- Electronic Inrush Current Limit (EICLTM) Protection
- Run/Fault Relay Output Contacts
- Mechanical Drive System
Features:
- Nominal output torque 2880 Inch-Lb (33 Kg/m)
- Output Speed 0-12 RPM
- Production Output - Max 90in/min 7.5Ft/min 2.3 m/min
Dimensions: L24” x W20” x H24” (610mm x 510mm x 610mm)
Shipping weight: 109lb 49kg
