Casting

Straight back crucible for melting and easy pouring of metals such as gold silver alloys etc. Made of fused silica with clay bond. Use with a torch for melting points up to 2 500°F (1370 ° C). Use handle to make the pouring easier (handle item #2279800)

Straight back crucible for melting and easy pouring of metals such as gold silver alloys etc. Made of fused silica with clay bond. Use with a torch for melting points up to 2 500°F (1370 ° C). Use handle to make the pouring easier (handle item #2279800)

Handle for Melting Dish makes it easy to melt and pour metals. It provides safety and assurance for the user. Wooden handle resists heat. Can be used with the melting dishes (#2279300- Straight Back & 2279500 High Back) & with the platinum crucibles (#2281500- Straight Back & 2281600- High Back). Overall length 14". Crucible not included. Crucibles sold seperatly.

Excellent for melting gold and silver.They have good thermal conductivity. Available in a variety of sizes or as a set of four. Withstand temperatures up to 2800°F/1538°C.

A silicone based odorless spray to release wax patterns from rubber or metal molds. Non-toxic, non-flammable. Environmentally safe.

These blades are well known to consistently meet high standards of durability and sharpness. These blades are used to cut precisely the rubber molds. Are packaged 100 per box. Available in 2 different shapes #11 Straight; #12 Curved

Comfortable plastic or metal handles for surgical knife blade for cutting rubber molds.

An excellent cast iron made vulcanizer. The upper platen slides on twin guides and is raised and lowered by a central screw. All the electronic controls are enclosed in the base. Made in USA. Features: • Steel platens measure 5” X 8” • Maximum opening 3” • Platen alignment by guide bars • Ceramic heating element • Thermostat, pilot and on/off switch • Temperature range 100°F-450°F (38°C- 233°C) • Dimensions 15” X 8” X 18” • Weight. 35 lbs

Made of aluminum with a single cavity. Side holes provide an escape channel for the excess rubber during vulcanization. All have 1-7/8"Wide and 2-7/8" Large (cavity size). Different thickness: ¾"; 1"; 1¼"; 1½"

Bench top casting machine allows both regular flasks and perforated flasks using vacuum technology on the right side. On the left side, it eliminates air bubble for cleaner, denser molds. Easy to operate, gives consistent results, while reducing the risk of casting defects. Low maintenance. * The system includes: 3 rubber seals (3", 3-3/8", 4") Perforated flask (3.5x4") Sprue base 3.5" Flask tong 2 adapter plates for 3.5" and 4" diameter perforated flasks and another for regular flasks Bell jar 8"x9" Vacuum pump oil Specifications: 1/2 HP; 3 CFM; 110V Weight: 87 lbs Dimensions: 23"x 11"x 14" SHIPPING CHARGES MAY APPLY

9 oz replacement crucible with slot to fit Procraft Centrifugals. Metals may be torch melted in these crucibles as they sustain high temperatures up to 2500°F/1370°C.

1.3kg replacement "V" shaped crucible to fit on Centrifugal machines. Metals may be torch melted in these crucibles as they sustain high temperatures up to 2500°F/1370°C.

Reduces air bubbles and voids around wax patterns Round top for flask up to 4.25” Compact design with variable speed Dimensions: 150 x 150 x 110mm Weight 4 lbs Electrical: 110V/60HZ

Used for pouring ingots of various sizes. 50dwt (78grams); 35mm (depth) X 90mm (length) X 35mm (width) 80dwt (124grams); 30mm (depth) X 120mm (length) X 45mm (width) 200dwt (310grams); 40mm (depth) X 155mm (length) X 65mm (width)

Double sided wire ingot mold. Each ingot mold can make 3 sizes of wire.

An ideal melting torch for large amounts of gold, silver and metal alloys but only small amounts of platinum. Heavy duty, all brass body, with a check valve safety feature to help prevent the reverse flow of gases. Leak proof valves for improved safety and reliability. Supplied with one large single orifice melting tip, tested and inspected. Hoses not included UL listed.

Drum for centrifugal made of steel, helps protect the operator against accidental metal spilling from the whirling crucible. Base measures 24" x 24", with the drum 23¾"W x 11½"H. Optional cover provides extra protection. Shipping weights as follows: drum 16 lb.; drum and cover 23 lbs. (Long Arm Centrifugal Machine is not included.)

Compact bench top casting machine use for vacuuming air and gas from flasks. By pulling the air and gas out from the mold, the molten metal flows easily to every opening. Vacuum integrated in machine. Caracteristics: ½HP 3CFM Investment plate size: 11''X11'' Bell Jar: 9" diameter X 8" Height Weight: 50lbs Dimensions: 15"Wx 8"L x 18"

Very well made wax injectors. Two Large knobs on cover for easy adding or removing wax Chamber made of heavy duty cast aluminium Outside made with high resistant stainless steel Uses an external air source ( can use silent compressor see related products) No leakage with a nozzle double sealed Air regulator and pressure gauge 0-30PSI Heavy Duty air pressure regulator with easy to read dial Ceramic-mica Heating element Adjustable bimetallic Thermostat Wax Capacity: 1-1/3 Quarts Maximum Temperature: 250°F/ 120°C Dimensions: 8"Width X 10"Height Electric: 110V/ 60Hz / 1PH Weight: 19 lbs Made in USA

Integrated Hand Pump Very well made wax injectors. Two Large knobs on cover for easy adding or removing wax Chamber made of heavy duty cast aluminium Outside made with high resistant stainless steel No leakage with a nozzle double sealed Air regulator and pressure gauge 0-30PSI Heavy Duty air pressure regulator with easy to read dial Ceramic-mica Heating element Adjustable bimetallic Thermostat Wax Capacity: 1-1/3 Quarts Maximum Temperature: 250°F/ 120°C Dimensions: 8"Width X 14"Height Electric: 110V/ 60Hz / 1PH Weight: 19 lbs Made in USA

Very well made wax injectors. Two Large knobs on cover for easy adding or removing wax Chamber made of heavy duty cast aluminium Outside made with high resistant stainless steel Uses an external air source ( can use silent compressor see related products) No leakage with a nozzle double sealed Air regulator and pressure gauge 0-30PSI Heavy Duty air pressure regulator with easy to read dial Ceramic-mica Heating element Adjustable bimetallic Thermostat Built-in side drain for clean up Wax Capacity: 2-3/4 Quarts Maximum Temperature: 250°F/ 120°C Dimensions: 8"Width X 14"Height Electric: 110V/ 60Hz / 1PH Weight: 27lbs Made in USA

Freeman® Pink wax injection flakes. With an excellent flow characteristics producing very high detail and easy removal without breakage. Injection Temperature: 68ºC / 155ºF Sold in bags of 1 lbs

Freeman® Aqua Green wax injection flakes. An all-purpose injection wax. Minimal shrinkage, very good flow and has flexibility. Provides the ideal balance of characteristics demanded by most designers and casters. Injection Temp: 65ºC / 150ºF * Aqua Green, Ruby Red & Turquoise Freeman injection waxes have all the same caracteristics. The only difference is the colour. Sold in bags of 1 lb

Freeman® Turquoise wax injection flakes. An all-purpose injection wax. Minimal shrinkage, very good flow and has flexibility. Provides the ideal balance of characteristics demanded by most designers and casters. Injection Temp: 65ºC / 150ºF * Aqua Green, Ruby Red & Turquoise Freeman injection waxes have all the same caracteristics. The only difference is the colour. Sold in bags of 1 lb

Freeman® Ruby Red injection wax flakes. An all-purpose injection wax. Minimal shrinkage, very good flow and has flexibility. Provides the ideal balance of characteristics demanded by most designers and casters. Injection Temp: 65ºC / 150ºF * Aqua Green, Ruby Red & Turquoise Freeman injection waxes have all the same caracteristics. The only difference is the colour. Sold in bags of 1 lb

Stainless steel heavy-duty 16GA regular flasks. Withstands thermal shock and corrosion.

Dual scale stainless steel thermometer with an 8” stem. Supplied with clip. 50-400F/ 0-220C

For making jewellery soldering flux. Allows solder to flow. Can be used to put on melting crucibles that will protect it from wering it fast.