Close

Complete Line of Jewellery Supplies

Picture of Rolling Mill Ultra 130mm Combo with motor Pepe

Rolling Mill Ultra 130mm Combo with motor Pepe


Pepetool rolling mill with motor. The rolling mill and high torque motor is mounted on a base machined from structural grade aluminum. Safety features include an e-stop, auto shut off control, protective stainless steel bars on both ends of the rolling mill. The control is high tech, allowing the rolling mill to function in either forward or reverse anywhere from 0 - 13 RPM. Made in U.S.A. (100$ for shipping)

 

Rolling Mill Specs:
• Roller diameter 65 mm
• Roller width is 130 mm
• Maximum opening 0-5 mm
• Flat area (+/- 0.01mm) 57 mm
• Square wire (+/- 0.01mm) : 1.0, 2.0, 3.0,4.0 , 4.5, 5.0, 5.5, 6.0, 6.5
• Ring shank - half round ellipsis: 2.5 x 1:3 x 1.25 ; 4 x 1.5

Electrical:

  • AC Drive System
  • Variable Frequency Drive
  • A Digital Hybrid AC Drive with Analog Interface
  • Vented NEMA 1 / IP 20 Enclosures

Features:

  • On/Off AC Line Switch
  • 200% - Starting Torque
  • Forward-Stop-Reverse Switch
  • Holding Torque at Zero Speed in "Stop" mode
  • Smooth motor torque
  • Excellent speed regulation with high torque loads throughout the entire speed range.
  • Regeneration Protection eliminates tripping

Safety Features:

  • Overload protection
  • Under voltage and Overvoltage Protection
  • Short Circuit Protection, phase to phase
  • Electronic Inrush Current Limit (EICLTM) Protection
  • Run/Fault Relay Output Contacts
  • Mechanical Drive System

Features:

  • Nominal output torque 2880 Inch-Lb (33 Kg/m)
  • Output Speed 0-12 RPM
  • Production Output - Max 90in/min 7.5Ft/min 2.3 m/min

Dimensions: L24” x W20” x H24” (610mm x 510mm x 610mm)
Shipping weight: 109lb 49kg

SKU: 2811075